Navisphere Command Line Interface (CLI) Reference - VMware Communities

CLI Error CodesError valueDescription197 The offset switch is not supported for this storage system.198 Valid COM port number is 1,2,3,or 4.199 Valid dial command is atd, atDp or atD.200 Valid message delay contains only ",,," (one or more commas).202 Target LUN number is missing.203 Session name is missing.204 SnapView multiple session feature is not supported.205 Cannot specify both snapshot name and snapshot ID.206 Cannot specify both -mode and -simulation.207 This command is not supported on remote host.208 Switch -pathname must be specified.209 Get local server attributes failed.210 This version of FLARE software does not support Hi5 RAID type.211 Only one of the switches -snapshotid, -snapshotname, or -lun can bespecified.212 Specified session and snapshot must be based on the same target LUN.213 Cannot add LUN to reserved LUN pool; the maximum number of reservedLUNs has been allocated.214 Cannot add LUN to reserved LUN pool; the maximum number of reservedLUNs that can be added is n.215 The HLU (host LUN) number you specified cannot be found.216 This command must be issued from the SP to which the LUN will trespass.217 Invalid bus or enclosure number.218 Invalid WWN seed.219 Invalid EMC part number.220 This RAID group has maximum number of LUNs already.221 Not enough reserved LUNs in the specified SP's reserved LUN pool.475