Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -verifypath (CX series only)Tests the parameters of a connection pathDescriptionThe naviseccli connection command with the -verifypath functiontests the parameter of a connection path.Note: A connection set name, an IP address, and an optional port number areneeded to complete this command.PrerequisitesSyntaxOptionsOuputYou must have a user account on the storage system on which youwant to execute the command.connection -verifypath is used with naviseccli (described onpage 37) as follows:connection -verifypath -name name -target address[:port] [-sp a|b-portid portid]-name nameSpecifies the name of the connection set, which contains the pathto verify.-target address:portSpecifies the IP address and listening port (default 3260) of thetarget storage system.-sp a|bSpecifies the storage processor on the initiating storage systemused for the session.-portid portidSpecifies the front-end port number on the storage processor ofthe initiating storage system to be used for the session.-oStandard override option. Without this option, the user isprompted to confirm intent.Test/verify command for target {ipaddr[:portnum]} from{fe port} completed successfully.402 EMC Navisphere Command Line Interface (CLI) Reference