Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsNote: Classic CLI does not support this command switch.-lcc busNumber enclosureNumber [lcca|lccb]Displays resume information for the link control card. If you omitlcca or lccb, information is returned for link control cards A andB.-mgmt [mgmta|mgmtb] (CX3 series only)Displays resume information for the management modules. Ifyou specify mgmta, resume information is displayed for themanagement module associated with SP A; if you specify mgmtb,resume information is displayed for the management moduleassociated with SP B.-mpDisplays resume information for the enclosures.-pc (Not supported on AX4-5 series)Displays resume information for the SAN personality card.-ps busNumber enclosureNumber|xpe [psa|psb]Displays resume information for the power supply. If you omitpsa or psb, information is returned for power supplies A and B.Note: For CX3 model 40 systems, CX3 model 20 systems, and CX3 model10 systems, resume information is displayed for the power suppliesassociated with the SP you specify in the command line. If you omit psaor psb arguments, N/A values are returned for the power supplies thatare not associated with the SP you specify.-sp spDisplays resume information for the specified SP.-spsNote: For CX3 series and later storage systems, resume information forboth SPs is displayed. If the SP specified in the command line is notfunctional, the CLI continues to return resume information for both SPs.Displays resume information for the standby power supply (SPS)that is associated with the SP you specify in the command line.191