Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsrebootpeerSP (AX4-5 series, AX150 series, and CX3 series only)Reboots a peer SPDescriptionLets you reboot the peer SP of the target SP in a dual-SP storagesystem. For the rebootpeerSP command, the peer SP is the SP on thestorage system to which the command is not targeted.Note: See the rebootSP command, to reboot the target SP or both SPs on thestorage system.SyntaxrebootpeerSP is used with naviseccli (described on page 37) asfollows:rebootpeerSP [-o]PrerequisitesYou must have a user account on the storage system on which youwant to execute the command.Options -oExecutes the command without prompting for confirmation.ExamplesThe following example reboots the peer SP of the target SP. The targetSP is ss1_spa; the peer SP is ss1_spb.naviseccli -h ss1_spa rebootpeerSPThis operation will cause a storage system reboot!DO YOU WISH TO CONTINUE? (y/n)?246 EMC Navisphere Command Line Interface (CLI) Reference