Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandssetsptimeDescriptionSyntaxPrerequisitesOptionsOutputSets the SP system clocksThe naviseccli or navicli setsptime command sets the system timefor both SPs.setsptime is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:setsptime [-M month-num] [-D day-num] [-Y year-num][-h hour-num] [-m minute-num]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.-M month-numSpecifies the month (1-12).-D day-numSpecifies the day (1-31).-Y year-numSpecifies the year; use four digits.-h hour-numSpecifies the hour (0-23).-m minute-numSpecifies the minute (0-59).There is no output. Errors are printed to stderr.Example naviseccli -h data1_spa setsptime -M 3 -D 13 -Y 2002 -h 9This example sets the SP system clock to March 13, 2002, 9:00 am.Note: To use this command with navicli, replace naviseccli with navicli.269