Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsgetloopGets fibre loop informationDescriptionThe naviseccli or navicli getloop command returns informationabout the fibre loop.This command is not valid for IRIX hosts.Note: This command applies only to Fibre Channel storage systems.SyntaxPrerequisitesOptionsgetloop is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getloop [-clfo] [-conn] [-dlf] [-icl] [-ple] [-spf]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-clfoDisplays whether the command loop has failed over.-connDisplays the connection number.-dlfDisplays the data loop failover status as follows:Does system have data loop fail-over:Yes/NoDoes system have illegal Cross-Loop:Yes/No-iclDisplays whether there is an illegal cross loop.-pleDisplays whether private loop is enabled.-spfDisplays whether this SP can fail over.176 EMC Navisphere Command Line Interface (CLI) Reference