Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-privateReturns the offset of every partition on the disk.-productReturns the product ID of the disk.-rbReturns the percentage of the disk that is rebuilt.-readReturns the total number of read requests made to the diskmodule. You might find the LUN read information in getlunmore useful because it is for the entire LUN, and not just for oneof the disk modules in the LUN.-rdsReturns the number of read requests.-revReturns the product revision number of the disk.-rgReturns the RAID group (if any) associated with this disk.-sectorsReturns the number of user sectors.-serialReturns the serial number of the disk.-sigReturns the bind signature, which was automatically assignedduring the bind process.-speeds (CX3 series only)Displays the current and maximum speed of the disk. The currentspeed indicates the speed a disk is currently running at; themaximum speed indicates the highest speed a disk is capable ofrunning at. The current speed is dependent on the speed of theenclosure that contains the disk, which is also dependent on thecurrent speed of the bus that the enclosure is running on.170 EMC Navisphere Command Line Interface (CLI) Reference