Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsremoverg (RAID group)Removes a RAID groupDescriptionSyntaxPrerequisitesOptionsThe naviseccli or navicli removerg command removes a specifiedRAID group.removerg is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:removerg rgIDFor naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.rgIDRAID group identification number. rgID specifies a numberbetween 0 and the maximum number of RAID groups supportedby the RAID group storage system.Example naviseccli -h ss1_spa removerg 1This command removes RAID group 1.Note: To use this command with navicli, replace naviseccli with navicli.254 EMC Navisphere Command Line Interface (CLI) Reference