Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-capacityReturns, in MB, the LUN capacity.-crusReturns the names and states of disks in this LUN.-defaultReturns the name of the default owner (SP) of the LUN.-diskReturns the disk statistics for the disks in the specifiedlun-number. Valid only when statistics logging is enabled.-drivetypeReturns the drive type of the disks in the LUN.-dsaDisplays the status of Dual Simultaneous Access (dsa).-elementReturns, in blocks, the stripe size. The stripe size is the number ofsectors that the storage system can read or write to a single diskmodule in the LUN. The default size is 128 sectors. This size wasspecified when the LUN was bound. Stripe element size does notapply to a RAID 1 LUN, individual unit, or hot spare.-ena**Returns the disk status (enabled/disabled). Valid only when the-disk switch is included in the command.-etp*Returns the explicit trespasses in SP A and SP B.-ff*Returns the number of times that a write had to flush a page tomake room in the cache.-hrdscsiReturns the total number of hard errors.-idle**Returns the percentage of time that the disks within the LUN areidle.180 EMC Navisphere Command Line Interface (CLI) Reference