Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandseach initiator. If the -userName parameter is omitted, it defaultsto the -initiatorName value. If a target is being configured formutual CHAP, the target name becomes the username.-secret secretIf initiator user account data is being added, secret specifies theCHAP secret (password) that the storage system will use toauthenticate the initiator. You can specify the secret in ASCII orhexadecimal characters (see the -hexsecret switch that follows).By defaulgt, -secret is an ASCII string. ASCII secrets must consistof at least 12 and no more than 16 characters. Hexadecimal secretsmust consist of at least 12 and no more than 16 pairs of data (24 to32 characters).-hexsecretIf initiator user account data is being added, including the-hexsecret parameter specifies that -secret is a hexadecimal value.-oExecutes the command without prompting for confirmation. Ifyou include the -o switch, you will not be prompted to confirmthat you want to add the user account data. If you do not use the-o switch, you will be prompted to confirm that you want to addthe user.ExampleThe following example adds a user account to the storage systemdatabase:naviseccli connection -adduser -definedfor initiator -initiatorName5.com.microsoft:cpc7745 -username Guest -secret 1234567890123456Adding an iSCSI user account with the followingattributes:Initiator Name: iqn.1991-05.com.microsoft:cpc7745User name: GuestSecret: 1234567890123456Defined For: initiatorDo you really want to perform this action (y/n)? y373