Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsMax Requests:N/AAverage Requests:N/AHard errors:N/ATotal Reads: 0Total Writes: 0Prct Busy:Not AvailablePrct Idle:Not AvailableSystem Date: 05/22/2008Day of the week:ThursdaySystem Time: 11:31:29Read_requests: 0Write_requests: 0Blocks_read: 0Blocks_written: 0Sum_queue_lengths_by_arrivals: 0Arrivals_to_non_zero_queue: 0Hw_flush_on: 0Idle_flush_on: 0Lw_flush_off: 0Write_cache_flushes: 0Write_cache_blocks_flushed: 0Internal bus 1 busy ticks: N/AInternal bus 1 idle ticks: N/AInternal bus 2 busy ticks: N/AInternal bus 2 idle ticks: N/AInternal bus 3 busy ticks: N/AInternal bus 3 idle ticks: N/AInternal bus 4 busy ticks: N/AInternal bus 4 idle ticks: N/AInternal bus 5 busy ticks: N/AInternal bus 5 idle ticks: N/AController busy ticks: 0Controller idle ticks: 0Example naviseccli -h ss1_spa getcontrolNote: To use this command with navicli, replace naviseccli with navicli.160 EMC Navisphere Command Line Interface (CLI) Reference