Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -getuserDisplay CHAP authentication user dataDescriptionSyntaxPrerequisitesOptionsOutputThe naviseccli connection command with the -getuser functiondisplays CHAP authentication user account data that is configuredon the storage system. If no arguments are specified, all of the CHAPusers defined on the storage system are displayed. Use -definedFor,-initiatorName, and -userName to display information for aspecified user. If you specify a particular user and that user is notfound, the error message, The specified user account does notexist, is returned.connection -getuser is used with naviseccli (described on page 37) asfollows:connection -getuser [-definedFor initiator | target ] [-userNameuserName] [-initiatorName initiatorName]You must have a user account on the storage system on which youwant to execute the command.-definedFor initiator | targetinitiator specifies that information for a CHAP initiator user isdisplayed. If you specify initiator, you must include the-userName and -initiatorName.target specifies that information for a CHAP target user (thestorage system user account) is displayed. If you specify target,you must include the -userName.-initiatorName initiatorNameThe initiator is the host or HBA that initiates the connection withthe target storage system. The initiator is identified by the IQN ofthe iSCSI initiator.-userName usernameSpecifies the iSCSI CHAP username for the initiator or target userbeing specified by initiatorName.Initiator Name: iqn.1991-05.com.microsoft:cpc7745User Name: GuestDefined For: initiator376 EMC Navisphere Command Line Interface (CLI) Reference