Navisphere Command Line Interface (CLI) Reference - VMware Communities

More documents

Recommendations

Info

Domain and Security Commandsdomain -remove (AX4-5 series running Navisphere Managerand Navisphere Express only, and CX series)Removes a storage system from a domainDescriptionThe naviseccli domain command with the -remove function,removes the storage system you specify from a storage systemdomain. When you remove a storage system from a domain, youspecify the storage system’s IP address.If you want to move a storage system to a different domain, usedomain -remove to remove the system from the current domain, thendomain -add to add the system to the other domain.Note: If you remove the master storage system from the domain, you destroythe domain. The CLI warns you before you can complete the operation. If thestorage system you want to move is the master storage system in the domain,and you want to retain the domain, then you should change the masterstorage system to another system in the domain before moving the oldmaster (see domain -setmaster).SyntaxPrerequisitesOptionsdomain -remove is used with naviseccli (described on page 37) asfollows:domain -remove IPAddr [-o]You must have a user account on the storage system on which youwant to execute the command.IPAddrThe IP address of the storage system you want to remove.Note: You must identify the storage system by the storage system’s IPaddress. Specify the IP address in the form b.c.d.e where b, c, d and erange from 0 through 255. Example 111.222.33.44.-oExecutes the command without prompting for confirmation.OutputNone if the command succeeds; status or error information if it fails.426 EMC Navisphere Command Line Interface (CLI) Reference
Domain and Security CommandsExampleThe following example removes the specified storage system, fromthe storage system domain.naviseccli -address ss1_spa domain -remove 111.222.33.44WARNING: You are about to remove the following node fromthe domain: 111.222.33.44Proceed? (y/n) y427
Page 1 and 2:
EMC ® Navisphere ®Command Line In
Page 3 and 4:
ContentsPreface ...................
Page 5 and 6:
Contentsgetconfig .................
Page 7 and 8:
ContentsEstimating the reserved LUN
Page 9 and 10:
PrefaceAs part of an effort to impr
Page 11 and 12:
PrefaceFor the most current managem
Page 13 and 14:
Invisible Body Tag1About EMC Navisp
Page 15 and 16:
About EMC Navisphere CLITermEvent M
Page 17 and 18:
About EMC Navisphere CLIAbout EMC N
Page 19 and 20:
About EMC Navisphere CLI◆send LUN
Page 21 and 22:
About EMC Navisphere CLIAbout Navis
Page 23 and 24:
About EMC Navisphere CLIThe tradeof
Page 25 and 26:
About EMC Navisphere CLIFigure 1 sh
Page 27 and 28:
About EMC Navisphere CLIConfiguring
Page 29 and 30:
About EMC Navisphere CLISupported o
Page 31 and 32:
About EMC Navisphere CLIWhat next?C
Page 33 and 34:
In2About CLI CommandsThis chapter e
Page 35 and 36:
About CLI CommandsGetting started w
Page 37 and 38:
About CLI CommandsnaviseccliDescrip
Page 39 and 40:
About CLI CommandsNote: When the -n
Page 41 and 42:
About CLI Commands-vEnables verbose
Page 43 and 44:
About CLI CommandsLUN IDs, unique I
Page 45 and 46:
About CLI CommandsnavicliSends stat
Page 47 and 48:
About CLI CommandsSpaces in argumen
Page 49 and 50:
3Basic CommandsThis chapter explain
Page 51 and 52:
Basic Commands◆ managedby .......
Page 53 and 54:
Basic Commandsnaviseccli -h ss1_spa
Page 55 and 56:
Basic CommandsFor SP A (SP hostname
Page 57 and 58:
Basic Commands-oExecutes the comman
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Basic CommandsNote: Duplication wil
Page 65 and 66:
Basic CommandsarraynameDescriptionR
Page 67 and 68:
Basic CommandsNote: If you issue th
Page 69 and 70:
Basic CommandsBus 0 is currently ru
Page 71 and 72:
Basic CommandsExampleThe following
Page 73 and 74:
Basic Commandsbackendbus -get -phys
Page 75 and 76:
Basic CommandsOutput Bus 0Current S
Page 77 and 78:
Basic CommandsPrerequisitesOutputEx
Page 79 and 80:
Basic CommandsbindCreates a LUN wit
Page 81 and 82:
Basic CommandsLUN to bindRAID 3RAID
Page 83 and 84:
Basic CommandsSyntaxPrerequisitesOp
Page 85 and 86:
Basic Commands-elsz stripe-element-
Page 87 and 88:
Basic Commands-v verify-priority (A
Page 89 and 90:
Basic Commandscachecard -initialize
Page 91 and 92:
Basic CommandsOutput Total Memory:
Page 93 and 94:
Basic CommandsSyntaxPrerequisitesOp
Page 95 and 96:
Basic Commands-pf prefetch-type (No
Page 97 and 98:
Basic CommandsThe lower the priorit
Page 99 and 100:
Basic Commands-lex expansion (Not s
Page 101 and 102:
Basic Commandsclassiccli (CX series
Page 103 and 104:
Basic Commandsclearstats (CX series
Page 105 and 106:
Basic Commandscopytohotspare (not s
Page 107 and 108:
Basic CommandsNote: The disks in a
Page 109 and 110:
Basic CommandsemconfigurationDescri
Page 111 and 112:
Basic CommandsFor navicli, you must
Page 113 and 114:
Basic Commands50:06:01:60:90:60:00:
Page 115 and 116:
Basic Commands-d disksDownloads dis
Page 117 and 118:
Basic CommandsExamplesTo turn flash
Page 119 and 120:
Basic CommandsflashledsDescriptionS
Page 121 and 122:
Basic Commands-modelReturns the mod
Page 123 and 124:
Basic CommandsgetallGets comprehens
Page 125 and 126:
Basic Commands-reservedDisplays the
Page 127 and 128:
Basic CommandsDAE/SP Bus 0 Enclosur
Page 129 and 130:
Basic CommandsSP Information-------
Page 131 and 132:
Basic CommandsInformation about eac
Page 133 and 134:
Basic CommandsSample output display
Page 135 and 136:
Basic CommandsSP cache information
Page 137 and 138:
Basic CommandsLUN information (same
Page 139 and 140:
Basic CommandsLOGICAL UNIT NUMBER 1
Page 141 and 142:
Basic CommandsNumber of arrivals wi
Page 143 and 144:
Basic CommandsRemapped Sectors: N/A
Page 145 and 146:
Basic CommandsBus 0 Enclosure 0 Dis
Page 147 and 148:
Basic CommandsHBA/SP Pairs:HBA UID,
Page 149 and 150:
Basic CommandsgetarrayuidDescriptio
Page 151 and 152:
Basic CommandsgetcacheDescriptionSy
Page 153 and 154:
Basic Commands-rstaReturns the curr
Page 155 and 156:
Basic CommandsSPA Optimized Raid 3
Page 157 and 158:
Basic CommandsExamplenaviseccli -h
Page 159 and 160:
Basic Commands-idleReturns the perc
Page 161 and 162:
Basic CommandsgetcrusGets CRU state
Page 163 and 164:
Basic Commands-fanc (Not supported
Page 165 and 166:
Basic Commands-vscaReturns the stat
Page 167 and 168:
Basic CommandsgetdiskGets disk stat
Page 169 and 170:
Basic Commands-busyticksReturns the
Page 171 and 172:
Basic Commands-srReturns the total
Page 173 and 174:
Basic CommandsExample naviseccli -h
Page 175 and 176:
Basic Commands+nDisplays the oldest
Page 177 and 178:
Page 179 and 180:
Basic CommandsPrerequisitesOptionsF
Page 181 and 182:
Basic Commands-idleticksReturns the
Page 183 and 184:
Basic Commands-prbReturns the perce
Page 185 and 186:
Basic Commands-sor*Returns the sum
Page 187 and 188:
Basic Commands-whist*Returns write
Page 189 and 190:
Basic CommandsEnclosure 0 Disk 0 Qu
Page 191 and 192:
Basic CommandsNote: Classic CLI doe
Page 193 and 194:
Basic CommandsSample output of getr
Page 195 and 196:
Basic CommandsNote: To use this com
Page 197 and 198:
Basic Commands-legalReturns informa
Page 199 and 200:
Basic Commandsgetsniffer (CX series
Page 201 and 202:
Basic CommandsVERIFY RESULTS FOR UN
Page 203 and 204:
Page 205 and 206:
Basic Commandsgetunusedluns (not su
Page 207 and 208:
Basic Commandsioportconfig -list (C
Page 209 and 210:
Basic CommandsOutputInformation abo
Page 211 and 212:
Basic Commandsluncache -clearDescri
Page 213 and 214:
Basic Commandsluncache -listDescrip
Page 215 and 216:
Basic Commands-wwnDisplays the Worl
Page 217 and 218:
Basic Commandsmanagefiles -deleteDe
Page 219 and 220:
Basic Commandsmanagefiles -listDesc
Page 221 and 222:
Page 223 and 224:
Basic CommandsPrerequisitesOptionsO
Page 225 and 226:
Basic CommandsWhen the installation
Page 227 and 228:
Basic CommandsNote: If the storage
Page 229 and 230:
Basic Commandsndu -runrulesExecutes
Page 231 and 232:
Basic Commandsndu -commitDescriptio
Page 233 and 234:
Basic Commandsndu -revert (AX4-5 se
Page 235 and 236:
Basic Commandsnetworkadmin -getList
Page 237 and 238:
Basic CommandsNote: If you have the
Page 239 and 240:
Basic Commandsnetworkadmin -mibConf
Page 241 and 242:
Basic Commandsnetworkadmin -setUpda
Page 243 and 244:
Basic Commands-globalprefix prefixC
Page 245 and 246:
Basic CommandsrebootSPDescriptionRe
Page 247 and 248:
Basic Commandsremoteconfig -getconf
Page 249 and 250:
Basic Commands-write filenameWrites
Page 251 and 252:
Basic Commandsremoteconfig -setconf
Page 253 and 254:
Basic CommandsOutputExampleSee page
Page 255 and 256:
Basic Commandsresetandhold (CX3 ser
Page 257 and 258:
Basic Commands-email-smtpmailserver
Page 259 and 260:
Page 261 and 262:
Basic CommandsA lower value causes
Page 263 and 264:
Basic Commands-rcb read-cache-spb (
Page 265 and 266:
Basic Commandssetsniffer (CX series
Page 267 and 268:
Basic CommandssetspstimeDescription
Page 269 and 270:
Basic CommandssetsptimeDescriptionS
Page 271 and 272:
Page 273 and 274:
Basic Commandsshutdownsp (AX4-5 ser
Page 275 and 276:
Basic Commandsspcollect -info (auto
Page 277 and 278:
Basic Commandsspcollect (manual ver
Page 279 and 280:
Basic CommandsspportspeedDescriptio
Page 281 and 282:
Basic CommandsiSCSI systems, port s
Page 283 and 284:
Basic Commandssystemtype (AX4-5 ser
Page 285 and 286:
Basic CommandstrespassDescriptionTr
Page 287 and 288:
Basic CommandsunitserialnumberDescr
Page 289 and 290:
Invisible Body Tag4Access Logix (St
Page 291 and 292:
Access Logix (Storage Group) Comman
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Invisible Body Tag5LUN Expansion(Me
Page 327 and 328:
LUN Expansion (MetaLUN) CommandsFig
Page 329 and 330:
LUN Expansion (MetaLUN) Commandsmet
Page 331 and 332:
LUN Expansion (MetaLUN) CommandsCon
Page 333 and 334:
LUN Expansion (MetaLUN) Commands-lu
Page 335 and 336:
LUN Expansion (MetaLUN) Commands-ex
Page 337 and 338:
LUN Expansion (MetaLUN) CommandsYou
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
LUN Expansion (MetaLUN) Commands-co
Page 345 and 346:
LUN Expansion (MetaLUN) CommandsTab
Page 347 and 348:
LUN Expansion (MetaLUN) CommandsWri
Page 349 and 350:
LUN Expansion (MetaLUN) Commands-de
Page 351 and 352:
LUN Expansion (MetaLUN) Commands3.
Page 353 and 354:
Invisible Body Tag6Reserved LUN Poo
Page 355 and 356:
Reserved LUN Pool CommandsEstimatin
Page 357 and 358:
Reserved LUN Pool Commandsreserved
Page 359 and 360:
Reserved LUN Pool Commandsreserved
Page 361 and 362:
Reserved LUN Pool Commandsnavicli o
Page 363 and 364:
Invisible Body Tag7iSCSI (Internet
Page 365 and 366:
iSCSI (Internet SCSI) CommandsAbout
Page 367 and 368:
iSCSI (Internet SCSI) CommandsWindo
Page 369 and 370:
iSCSI (Internet SCSI) CommandsThe f
Page 371 and 372:
iSCSI (Internet SCSI) CommandsComma
Page 373 and 374:
iSCSI (Internet SCSI) Commandseach
Page 375 and 376: iSCSI (Internet SCSI) CommandsExamp
Page 379 and 380: iSCSI (Internet SCSI) Commands-subn
Page 381 and 382: iSCSI (Internet SCSI) Commandsconne
Page 395 and 396: iSCSI (Internet SCSI) Commands-user
Page 401 and 402: iSCSI (Internet SCSI) Commands-oSta
Page 405 and 406: iSCSI (Internet SCSI) Commandsnavis
Page 407 and 408: iSCSI (Internet SCSI) Commandsnavis
Page 409 and 410: iSCSI (Internet SCSI) Commandsisns
Page 411 and 412: Invisible Body Tag8LUN MigrationCom
Page 413 and 414: LUN Migration CommandsOptionsThe co
Page 415 and 416: LUN Migration Commandsmigrate -canc
Page 417 and 418: LUN Migration Commandsmigrate -list
Page 419 and 420: Invisible Body Tag9Domain and Secur
Page 421 and 422: Domain and Security CommandsNote: T
Page 423 and 424: Domain and Security Commandsdomain
Page 425: Domain and Security Commandsdomain
Page 429 and 430: Domain and Security CommandsOptions
Page 431 and 432: Domain and Security Commands0trueNT
Page 433 and 434: Domain and Security Commands-keyval
Page 435 and 436: Domain and Security Commandssecurit
Page 443 and 444: Invisible Body TagACLI Error CodesT
Page 445 and 446: CLI Error CodesError value(decimal)
Page 467 and 468: CLI Error CodesClassic CLI error co
Page 469 and 470: CLI Error CodesError valueDescripti
Page 477 and 478:
CLI Error CodesError valueDescripti
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
CLI Error CodesFeature command erro
Page 485 and 486:
CLI Error CodesConnection and iSNS
Page 487 and 488:
Invisible Body TagBUnsupportedComma
Page 489 and 490:
IndexAAccess Logix optiondefined 16
Page 491 and 492:
IndexFLARE software revision (getag
Page 493 and 494:
IndexPresent state, SP 164private L
Page 495 and 496:
Indexsetsniffer 265setspstime 267se
show all

Navisphere Command Line Interface (CLI) Reference - VMware Communities

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?