Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) Commandsnaviseccli -h ss_spa storagegroup -connecthost -o -host ServerXYZ-gname Backupnaviseccli -h ss_spa storagegroup -addhlu -gname Production -hlu20 -alu 20naviseccli -h ss_spa storagegroup -addhlu -gname Backup -hlu 21-alu 21The following example of storagegroup setpath and storagegroupsethost with failovermode sets the type of trespass needed forfailover software. Also, the failover mode option is set to 4 in sethostand setpath switches.naviseccli -h 10. 4. 78. 184 -user a -password a -scope 0 storagegroup-sethost -ip 10.4.78.184 -failovermode 4naviseccli -h 10. 4. 78. 184 -user a -password a -scope 0 storagegroup-setpath -hbauid xxxxx-sp a -spport xxxxx -failovermode 4The following example specifies the form of failovermode whichworks for one storage group. For the options -failovermode and -all,the command displays the new failover mode as 4 under the HBAinformation section when the failover mode is active/active.naviseccli -h 10. 4. 78. 184 -user a -password a -scope 0 port -list-failovermodeInformation about each port of this HBASP Name : SP ASP Port ID : 0Failover Mode : 4naviseccli -h 10. 4. 78. 186 -user a -password a -scope 0 port -list -allHBA UID: 20 : 20 : 20 : 20 : 20 : 20 : 20 : 20 : 20 : 20: 20 : 20 : 20 : 20 : 20 : 20Server Name : TCS_DellServer IP Address : 10 . 4 . 78 . 159HBA Model Description: 2HBA Vendor Description : DELLHBA Device Driver Name : N/AInformation about each port of this HBA :SP Name : SP ASP Port ID : 0HBA Devicename : N/ATrusted : NOLogged In : NODefined : YESInitiator Type : 3StorageGroup Name : None323