Navisphere Command Line Interface (CLI) Reference - VMware Communities

Domain and Security Commandsdomain -add (AX4-5 series running Navisphere Manager andNavisphere Express only, and CX series)Adds one or more storage systems to a domainDescriptionThe naviseccli domain command with the -add function, adds thestorage system you specify to the storage system domain. You canchoose to add one or multiple storage systems to the domain. Whenyou add a storage system to the domain, you specify the storagesystem’s IP address.See domain -setmaster if you need to establish a domain. You thencan add storage systems to the domain using domain -add.Note: The domain -add command is supported for AX4-5 series NavisphereExpress only with FLARE version 02.23.050.5.7.xx or later and not with anyprior FLARE versions.SyntaxPrerequisitesOptionsdomain -add is used with naviseccli (described on page 37) asfollows:domain -add IPAddr [-o]You must have a user account on the storage system on which youwant to execute the command.IPAddrThe IP address of the storage system you want to add.Note: You must identify the storage system by the storage system’s IPaddress. Specify the IP address in the form b.c.d.e where b, c, d and erange from 0 through 255. Example 111.222.33.44.-oExecutes the command without prompting for confirmation.OutputNone if the command succeeds; status or error information if it fails.423