Navisphere Command Line Interface (CLI) Reference - VMware Communities

Domain and Security Commandsdomain -listDescriptionDisplays all storage systems in a domainThe naviseccli domain command with the -list function, lists the IPaddress, name, port and secure port information for all storagesystems in a storage system domain. If you only want to viewinformation about the master storage system in the domain, you canuse the optional -master switch.Note: You can only have one master storage system in a domain (seedomain -setmaster).Note: The domain -list command is supported for AX4-5 series NavisphereExpress only with FLARE version 02.23.050.5.7.xx or later and not with anyprior FLARE versions.SyntaxPrerequisitesOptionsdomain -list is used with naviseccli (described on page 37) asfollows:domain -list [-master]You must have a user account on the storage system on which youwant to execute the command.-masterSpecifies to display only information about the master storagesystem in the domain.Output Node: APM00011111111IP Address: 111.222.33.55 (Master)Name:CX300I_33_55Port: 80Secure Port: 443IP Address: 111.222.33.44Name:CX300I_33_44Port: 80Secure Port: 443ExampleThe following example lists the storage systems in the storage systemdomain.naviseccli -address 111.222.33.44 domain -list425