Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) CommandsOptional switches:-initiatorAuthentication 0|1If initiator authentication is turned on, all initiators logging intothe port must be authenticated by the storage system.0 = Not required - default1 = Required-mtuConfigures the MTU size for the specified iSCSI port. If notspecified during the initial creation of a portal, the default will be1500. If -mtu is not specified during the update of a portal’ssetting, the MTU setting will not change.If a change in settings has been requested, a confirmation will bedisplayed.-oExecutes the command without prompting for confirmation. Ifyou include the -o switch, the port will be set (configured)without a confirmation prompt. Without the -o switch, thesoftware displays confirmation messages that you must respondto.OutputExampleNone if the command succeeds; status or error information if it fails.The following example configures the network settings for the portwith IP address 10.14.80.110:naviseccli connection -setport -sp b -portid 0 -address -subnetmask255.255.255.0 -gateway 10.14.80.1Do you really want to perform this action (y/n)? y382 EMC Navisphere Command Line Interface (CLI) Reference