Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-modempage(Not supported on AX4-5 series and AX series)-destnumber phone-numberSpecifies the pager phone number (with area code)and is required.-msgnumber phone-numberSpecifies the number that will appear on the pagerdisplay (with area code).[ -comport number ]Specifies the number is the PC COM port number. Ifomitted, the CLI assumes COM l; optional.[ -messagedelay seconds ]Specifies the delay between sending the destinationphone number to the modem and sending themessage to the modem. This allows enough time forthe receiving modem to answer the call. Optional.[ -dialcommand command]Specifies the modem dial command to be used bythe agent. Optional.[ -initcommand command-to-modem ]Specifies the modem dial command used by theagent. The initcommand allows for some custommodem configuration before the data is sent to it.Optional.-snmp-community communitySpecifies a community on the snmp managmenthost; optional.-desthost destination-hostnameSpecifies an snmp management hostname;required.-device deviceSpecifies the device represented by the snmpmanagement host. Required.OutputResult of the test.258 EMC Navisphere Command Line Interface (CLI) Reference