Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) Commandsstoragegroup command, -chgname switch-chgname -gname StorageGroupName| -uid StorageGroupUID-newgname NewName [-o]Renames the storage group. You must use two of the followingswitches with -chgname:-gname StorageGroupNameSpecifies the name of the storage group. StorageGroupNamespecifies a user-defined storage group name.-uid StorageGroupUIDSpecifies the storage group unique identification number.For Fibre Channel storage systems, the UID uses the WorldWide Name (WWN) format such as:10:00:00:00:C9:20:DE:0C:10:00:00:00:C9:20:DE:0C.For iSCSI storage systems, the UID uses the initiator namewhich uses the IQN format such as:iqn.1992-04.com.emc:cx.apm00034901792.b0.-newgname NewNameSets the new storage group name for the storage group(specified by the -gname or -uid switch). NewName specifiesthe new name for the specified storage group.-oExecutes the command without prompting for confirmation.storagegroup command, -connecthost switch-connecthost -host HostName-gname StorageGroupName|-uid StorageGroupUID [-o]Connects the specified host to the specified storage group. Itconnects all of the host’s HBA/SP combinations to the storagegroup by assigning the host’s initiator records to the storagegroup. To assign a storage group to a specific HBA, usestoragegroup -setpath.You may use the navicli port -list command to get a list ofregistered HBAs. If nothing is registered, use the navicli registercommand to register an HBA.311