Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsThe lower the priority, the slower the LUN is rebuilt and thelesser the impact on overall system performance. The default isLow.-w write-aside (Dual-SP AX4-5 series running Navisphere Managerand CX series only)write-aside specifies, in blocks, the largest write request size thatwill be written to cache. Write requests greater than the write-asidevalue are written directly to disk, bypassing write cache. Validvalues are 16 through 65534.Note: Attempting to use this switch while not in Engineering Mode willresult in an error message.OutputThere is no output. Errors are printed to stderr.Example naviseccli -h ss1_spa chglun -l 3 -c write -r highChange LUN 3 to enable write caching and rebuild with high priority.Note: To use this command with navicli, replace naviseccli with navicli.97