Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -getsharedauth (CX series only)Displays the username and status of the shared authentication forthe iSCSI initiator storage systemDescriptionSyntaxPrerequisitesOutputThe naviseccli connection command with the -getsharedauthfunction displays the username and status of the sharedauthentication for the iSCSI initiator storage system.connection -getsharedauth is used with naviseccli (described onpage 37) as follows:connection -getsharedauthYou must have a user account on the storage system on which youwant to execute the command.User Name: user1Enabled: TrueIf no shared credentials are defined for the storage system, then theoutput is:No storage system shared credentials are defined.ExampleThe following example displays the username and status of theshared authentication for the iSCSI initiator storage system.connection -getsharedauth390 EMC Navisphere Command Line Interface (CLI) Reference