Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-nameReturns the LUN name. This switch applies only to storagesystems running a version of FLARE software that supportsstorage group commands. LUN names are displayed in the UI.You cannot use the LUN name as a CLI command argument.Note: The -name switch applies only to shared storage systems.-nanzq*Returns the number on arrivals with nonzero queue.-nminusReturns the status of minimal-latency read support (is or is notsupported).-nzrca*Returns the nonzero request count arrivals in SP A and SP B.-offsetReturns the alignment offset, assigned when the LUN was bound.Refer to the bind - offset switch.-ownerReturns the name of the SP that currently owns the LUN. Ifneither SP owns the LUN a value of Unknown is returned.-parityelements (CX3 series only)Displays the number of parity elements for a LUN with a RAIDtype of RAID 6 or RAID 5. This switch is relevant only for LUNsthat have a RAID type of RAID 6 or RAID 5. For a LUN with aRAID type other than RAID 6 or RAID 5, the CLI displays anN/A value.-pdReturns, in blocks, the prefetch disable size. The prefetch disablesize is the size of the smallest read request for which prefetchingis disabled.-picReturns the maximum number of I/Os that can be outstanding tothe unit and have the unit still perform prefetching.182 EMC Navisphere Command Line Interface (CLI) Reference