Navisphere Command Line Interface (CLI) Reference - VMware Communities

LUN Expansion (MetaLUN) Commandsmetalun -listDescriptionLists the properties of existing metaLUNsThe naviseccli metalun command with the -list function and noother options lists all property information for all metaLUNs on astorage system. Issuing this command with one or more optionsdisplays the information based on the options issued.Note: In order to return values for performance data, you must enablestatistics logging for each SP in the storage system. Use Navisphere CLI orNavisphere Manager. Performance data switches are marked with an asterisk(*).If you request performance data for a specific metaLUN, make sure that youenter the IP address for the SP that is the current owner of the metaLUN.SyntaxPrerequisitesOptionsmetalun -list is used with naviseccli (described on page 37) asfollows:metalun -list [-name [metaLUN-name]][-metalunwwn metaLUN-WWN][-metalunnumber metaLUN-number][-aac*] [-actualusercap] [-autoassign] [-bindoffset] [-brw*][-components*] [-currentowner] [-canexpand] [-defaultowner][-drivetype] [-expansionrate] [-elszm] [-isredundant] [-percentexp][-rhist*] [-rwr*] [-state] [-totalcap] [-whist*]You must have a user account on the storage system on which youwant to execute the command.-name [metaLUN-name]Lists all information for that specific metaLUN.Issuing the -name command without a metaLUN-name displaysthe names of all metaLUNs on the storage system.-metalunwwwn metaLUN-WWNLists all information for that specific metaLUNIssuing the -metalunwwn command without a metaLUN-WWNdisplays the WWNs for all metaLUNs on the storage system.341