Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandssetfeatureDescriptionPrerequisitesSyntaxOutputAdds a software feature to a LUN controlled by an SPIn Navisphere, the naviseccli or navicli setfeature command addsand removes a software driver feature to a LUN owned by an SP.For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.setfeature is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:setfeature -on|-off -feature feature -lun lun| -lunuid uidwhere:-on or -offAdds or removes the feature.-feature featureIdentifies the feature; for example, RM for remote mirroring andsancopy for SAN Copy.-lun lun or -lunuid uidSpecifies the LUN. You can use the LUN number or the LUNunique ID, UID (which is the World Wide Name, WWN).If the version of FLARE software running on the SP does not supportthis command, a Not supported error message is printed to stderr.Other errors:COMMAND_NOT_SUPPORTEDFEATURE_REQUIREDLUN_AND_LUNUID_SPECIFIED264 EMC Navisphere Command Line Interface (CLI) Reference