Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsStateRemovedHot Spare ReadyUnboundUnformattedUnsupportedMeaningRemoved from the chassis; applies only to a disk module thatis part of a LUN.Module is either a hot spare or replacement disk module thatreplaced a failed module in a LUN. The data is being rebuilton a hot spare or replacement disk module.Ready to be bound into a LUN.Disk is unformatted.Disk is unsupported.SyntaxPrerequisitesOptionsgetdisk is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getdisk [disk-position] [-bind] [-bndcrs] [-busyticks] [-bytrd][-bytwrt] [-capacity] [-cpn] [-drivetype] [-hr] [-hs] [-idleticks] [-hw][-lun] [-numluns] [-private] [-product] [-rb] [-read] [-rds] [-rev] [-rg][-sectors] [-serial] [-sig] [-speeds] [-sr] [-state] [-sw] [-tla] [-type][-usercapacity] [-vendor] [-write] [-wrts] [-all]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.disk-positionReturns status for a specific disk. See “LUN IDs, unique IDs, anddisk IDs” on page 43 to verify the format for specifying disks.When the disk-position is not entered, getdisk reports on all disks,regardless of which switches are set. To obtain only theinformation specified by the optional switches, you must includedisk-position in the getdisk command.-bindReturns the percentage of the disk that is bound.-bndcrsReturns the number of Stripe Boundary Crossings (string value orUnknown).168 EMC Navisphere Command Line Interface (CLI) Reference