Navisphere Command Line Interface (CLI) Reference - VMware Communities

CLI Error CodesStorage group command error codesError valueDescription82 This version of the FLARE software does not support Access Logix(SAN or shared storage) systems.83 The group name entered does not match any storage groups for thisstorage system.84 The HBA UID specified is not known by the storage system.85 The LUN number specified is not a bound LUN number.86 Fairness not supported.87 The retyped password does not match (case sensitivity not checked).88 Server could not be found, or is not running an agent.89 Invalid switch combination.90 The UID (unique id) you entered does not match any storage groups forthis storage system.91 This version of FLARE software does not support the warm rebootfeature.92 Setpath cannot be used to map to the special default storage group.93 Invalid number of disks in RAID group.94 This version of FLARE software does not support the DualSimultaneous Access.95 This name identifies more than one storage group. Please identify thestorage group that you wish to perform this operation on by providing itsunique identifer(uid).96 Inaccessible command.97 New storage-system serial number must be a 12-character or lessalphanumeric value.98 Cannot perform inquiry.99 Cannot read block data.100 Cannot write to file.101 Cannot open pipe.470 EMC Navisphere Command Line Interface (CLI) Reference