Navisphere Command Line Interface (CLI) Reference - VMware Communities

CLI Error CodesError valueDescription222 This LUN cannot be added to the Storage Group since it is participating ina remote mirror.223 Allocate log must specify LUN with valid owner.224 This request has been issued through the SP that is not the current ownerof the targeted LUN.226 Invalid NDB password.227 Insert test event failed.228 The -addroffset switch is supported only for a non-destructive bind.229 The -addroffset switch must be supplied for a non-destructive bind.230 Cannot unbind LUN, PSM LUN that is not double faulted.231 Cannot unbind LUN because it is in use as an active hot spare.232 Cannot unbind LUN because a feature of the storage system is using it.233 Cannot unbind LUN because it is contained within a storage group.234 Incorrect LUN in storage group.235 Cannot display LUN WWNs and update LUN map information at the sametime.236 The DMF is not supported.237 Incorrect parameters while creating DMF.238 Incorrect Name and UID specified for the DMF.239 It is required to enter Name or UID for the DMF.240 The specified DMF is removed, the destination does not exist.241 Incorrect destination LUN WWN and number specified.242 DMF name is not unique.243 Unknown Descriptor for DMF.244 Incorrect List and Set specified for DMF.245 Throttle switch for DMF is missing.246 Throttle switch for DMF is invalid.476 EMC Navisphere Command Line Interface (CLI) Reference