Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsExample 1The following example shows sample output of the port -listcommand targeted to Fibre Channel HBAs and SPs:naviseccli -h ss1_spa port -listNote: To use this command with navicli, replace naviseccli with navicli.Information about each HBA:HBA UID:10:10:10:10:10:10:10:10:10:10:10:10:10:10:10:10Server Name:mattServer IP Address: 1.2.3.4HBA Model Description: ModelABCHBA Vendor Description: VendorABCHBA Device Driver Name: N/AInformation about each port of this HBA:SP Name:SP ASP Port ID: 0HBA Devicename: N/ATrusted:NOLogged In:NODefined:YESInitiator Type: 3StorageGroup Name: PrivateInformation about each HBA:HBA UID:20:00:00:00:C9:21:FE:D5:10:00:00:00:C9:21:FE:D5Server Name:20:00:00:00:C9:21:FE:D5:10:00:00:00:C9:21:FE:D5Server IP Address: UNKNOWNHBA Model Description:HBA Vendor Description:HBA Device Driver Name:Information about each port of this HBA:SP Name:SP BSP Port ID: 0HBA Devicename:Trusted:NOLogged In:YESSource ID: 7280384Defined:NOInitiator Type: 128StorageGroup Name: None296 EMC Navisphere Command Line Interface (CLI) Reference