Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsgetresumeDescriptionSyntaxPrerequisitesOptionsDisplays resume information for storage-system devicesThe naviseccli or navicli getresume command displays theproperties (resume information) for storage-system devices, such asthe enclosure display board, link control card (LCC), power supply(PS), storage processor (SP), SAN personality card, central processingunit module (CPU), I/O module, management module, and thestandby power supply (SPS). You can specify the device you want todisplay resume information for, or you can display resumeinformation for all devices.The product serial number, product part number, and productrevision are displayed only for the SPE enclosure on the CX4 seriesstorage system. This information is displayed only when you use the-all switch. Only Secure CLI supports use of this switch.getresume is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getresume [-all] [-cpu] [-io] [-iocarrier] [-lcc busNumberenclosureNumber [lcca|lccb]] [-mgmt mgmta|mgmtb] [-mp] [-pc][-ps busNumber enclosureNumber|xpe [psa|psb]] [-sp sp] [-sps]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-allDisplays resume information for all devices.-cpu (CX3 series only)Displays resume information for the central processing unit(CPU) modules.-io (CX3 series and AX4-5 series only)Displays resume information for the personality card.-iocarrier (CX4 series only)Displays resume information for I/O carrier devices on both SPs.190 EMC Navisphere Command Line Interface (CLI) Reference