Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandstrespassDescriptionTrespasses one or more LUNs to control of an SPThis command trespasses one or more LUNs to control of an SP.Note: Not applicable to single-SP storage systems.The command attempts to trespass all specified LUNs to the SP youspecify with the -h switch.Note: If trespass is executed while I/O processes are active, I/O errors mayoccur.SyntaxPrerequisitesOptionsOutputtrespass is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:trespass [all | lun lun-number | mine]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.allTrespasses on all LUNs in the system.lun lun-numberTrespasses on one LUN (specified in lun-number).minePerforms whatever trespassing is necessary to take all of theLUNs that have this SP as a default owner.There is no output. Errors are printed to stderr.Example naviseccli -h ss1_spa trespass allNote: To use this command with navicli, replace naviseccli with navicli.285