Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-forceInstalls without user interaction. If any package is not installedfor any reason, the software displays an error message andcontinues installing other packages specified in the command.-genDisplays the generation of the package.-verboseDisplays all results of the preinstallation validation checks.Without this switch, only errors that prevent installation (failures)are displayed.OutputExampleIf the version of FLARE software running on the SP does not supportthis command, a Not supported error message is printed to stderr.Other error message(s):NDU_NOT_SUPPORTEDNDU_CANNOT_FIND_FILENDU_CANNOT_XFER_FILEINVALID_PACKAGEnaviseccli -h ss1_spa ndu -install CX400-02.07.400.3.107.lstItem number: 0Name of the software package: FLARE-Operating-EnvironmentRevision of the software package: 02.07.400.3.107Already Installed Revision: 02.07.400.3.10InstallableYESDisruptive upgrade:NOThe requested package(s) will be installed. Do you wishto proceed?: (y/n)? yFor the SP with hostname 10.14.12.74, this command installs theFLARE Operating Environment bundle.228 EMC Navisphere Command Line Interface (CLI) Reference