Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsDescription:Description of host.Contact Person: Name and phone number of personmanaging the agent.*Device Connections: Displays following device info throughComments.*Device Name: Name of device, such as c1t3d0s2.*Storage System:Storage-system name, such as storage1.*SP:ID of SP managing the device: A or B.*Comments:Any comments.*Connection Type:Connection: SCSI, tty, lan, and so on.Users:List of users by login name and host; forexample, jgarg@cpc3440.Polling Interval: Interval in seconds, if applicable.*Serial Line Baud Rate: Baud rate, such as 9600, if applicable.*Log Entries to Transfer:Log size to transfer or all, if applicable.*Mega-Poll*Use explicit device namesEnabled or Disabled.Note: After listing agent information, you can change the agent settings withthe remoteconfig -setconfig command.SyntaxPrerequisitesOptionsremoteconfig -getconfig is used with naviseccli (described onpage 37) or navicli (described on page 45) as follows:remoteconfig -getconfig [-description] [-contact] [-users] [-interval][-write filename]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-descriptionDisplays contents of description field.-contactDisplays contents of contact field.-usersDisplays contents of users field.-intervalDisplays contents of polling interval field.248 EMC Navisphere Command Line Interface (CLI) Reference