Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-modelReturns the model number of the SP.-nameReturns the name of the device (taken from the Navisphere agentconfiguration file).-nodeReturns the device’s location in the file system.Note: Use the returned device name when you specify the device in a-command line.-osDisplays the operating system.-peersigReturns the signature of the peer SP.-promReturns the revision of the SP’s PROM code. Each SP in thestorage system should be running the same revision of PROMcode. PROM code is updated automatically when you update anSP’s FLARE software and choose the reboot option.-revReturns the microcode revision number of the FLARE softwarethat the SP is running. Each SP in the storage system will berunning the same revision of FLARE software. You can update anSP’s FLARE software.-scsiidReturns the SCSI ID of SP host connection. The SCSI ID numberfor the SP is determined by switch settings on the SP. Forinformation on these switch settings, see the storage-systeminstallation and maintenance manual.-serialReturns the serial number of the storage system.-sigReturns the unique SP signature.121