Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsFor navicli, you must be able to log in to the host runningNavisphere CLI.Options-hostDisplays only information about the host and the agent thatmanage the storage system. This is a composite of informationdisplayed by the getagent, remoteconfig, and ndu commands.-arrayDisplays only information about the storage system and itshardware components such as fan and link control card (LCC).This is a composite of information displayed by the getarrayuid,arrayname, getcrus, and initialiazearray commands.-hbaDisplays information about each switch, HBA and port. It alsodisplays the physical location of the port for a CX4 series storagesystem. This combines the information that the alpa, port,register, and getloop commands display.-spDisplays information about this SP only. This is a composite ofinformation displayed by the getsp, getcontrol, networkadmin,and getsptime commands.-cacheDisplays information about the cache. This is a composite ofinformation displayed by the getcache and getconfig commands.-diskDisplays only information about disks and enclosures in thestorage system. This is the same information displayed by thegetdisk command.-drivetypeDisplays the drive type of the LUN.-lunDisplays only information about each logical unit (host andstorage system) in the storage system. This is a composite ofinformation displayed by getsniffer, storagegroup, and getluncommands.124 EMC Navisphere Command Line Interface (CLI) Reference