Navisphere Command Line Interface (CLI) Reference - VMware Communities

About EMC Navisphere CLIAbout EMC Navisphere softwareThe EMC Navisphere software suite is composed of the followingcomponents:◆ Navisphere Storage System Initialization Utility◆ Navisphere host and SP agents◆ Navisphere Server Utility◆◆◆◆◆◆Navisphere ManagerNavisphere IntegratorNavisphere Storage Management ServerNavisphere CLINavisphere AnalyzerNavisphere Quality of Server ManagerAbout Navisphere Storage System Initialization UtilityYou must initialize the storage system in order to register the serverHBAs and NICs with the storage system and have access to thestorage system's data.For CX3 series and CX series Fibre Channel storage systems, use theutility to discover storage systems, and set network parameters (IPaddress, subnet mask, and default gateway). In addition, for CX3series storage systems with iSCSI data ports, use the utility to setnetwork parameters for these ports.Note: For CX series storage systems, an authorized service provider mustinstall and run the initialization utility.For AX4-5 series and AX series storage systems, use the utility todiscover storage systems, set network parameters (IP address, subnetmask, and default gateway), and create management user accounts.In addition, for AX150 iSCSI storage systems, use the utility to setnetwork parameters for the storage system's iSCSI data ports.17