Navisphere Command Line Interface (CLI) Reference - VMware Communities

CLI Error CodesSnapView, MirrorView, and other command error codesFor additional codes, see the CLI manual for your software.Error valueDescription123 Snapshot does not exist.124 This version of FLARE software does not support SnapView.125 Invalid SP name.126 Reserved LUN pool does not exist.127 Package number invalid.128 This version of FLARE software does not support nondisruptive softwareinstallation (NDU).129 Cannot open this file.130 File does not exist.131 RAID type must be r1 (RAID 1), r3 (RAID 3), r5 (RAID 5), or r1_0(RAID1/0).132 Multiple subcommands specified. Check syntax.133 Disk for PSM must be on DPE bus 0.134 Configuration does not exist.135 Configuration already exists.136 Size specified is too small.137 Configuration does not exist. Run the navicli initializearray command toconfigure the system.138 First option must be a subcommand.139 Cannot create RAID group for PSM (Persistent Storage Manager).140 Name or UID (unique ID) is required.141 Invalid name specified.142 Image UID is required.143 Name and LUN are required.144 Storage-system UID (unique ID) and LUN UID are required.472 EMC Navisphere Command Line Interface (CLI) Reference