Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsisns -listserverDescriptionDisplays all iSNS servers that are configured in the storagesystem’s iSNS serviceThe naviseccli isns command with the -listserver function, lists allservers that are configured in a storage system’s iSNS service.If there are multiple servers configured in the storage system’s iSNSservice, the -listserver operation will list multiple IP addresses andserver types. You can only have one primary server, therefore youwill only have one server designated as the primary. All other serversare designated as backup servers.Note: The primary server is the server the iSNS service activelycommunicates with.SyntaxPrerequisitesisns -listserver is used with naviseccli (described on page 37) asfollows:isns -listserverYou must have a user account on the storage system on which youwant to execute the command.Output IP Address: 111.222.33.44Server Type: BackupIP Address: 111.222.33.45Server Type: PrimaryIP Address is the IP address of the iSNS server. Server type specifieswhether the server is set as the primary or backup server.ExampleThe following example lists the primary and backup iSNS servers forthe storage system.naviseccli -address ss1_spa isns -listserver408 EMC Navisphere Command Line Interface (CLI) Reference