ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

106 Creating an Instrument Control Method
Fig. 156 Virtual detector setup, data file selection
The very last file selection will be displayed. You can either enter a new
file or you can use the Browse… button.
To avoid possible signal distortion, the Y-Axis multiplier in the
configuration of the virtual detector must be equal to that of the
selected data file.
The dialog box which appears includes in the upper part the typical
Windows searching facilities. Additionally you can search using the
Sample ID and/or the Analyst.
Fig. 157 Virtual detector setup, data file selection
Use the "Trace" column fields to select the required trace if more than
one is available in the data file.
After checking the Shift Time (min) option you can enter the desired time
difference e.g. for correcting time delays of serial arranged detectors.
External Source
The Settings button also becomes accessible. Clicking on it the following
dialog box appears.
Fig. 158 Virtual detector setup, channel selection
You can select from the pull-down menu one of the detectors or detector
channels accessible in the configured system.