ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

178 Knauer Instrument Control Method Options
Clicking on the Start> button starts the automatic performance of the
whole PQ procedure. It will run like a usual sequence. The direct control
should not being used while running the PQ sequence.
While the data acquisition is running you can add traces of other runs as
usual but with one exception. You cannot add traces of earlier runs of the
same PQ session because they are at this time only temporarily stored
and not accessible. The final storage takes place at the end of the
session. This is indicated by monitoring the performance qualification
report.
Fig. 265 Performance qualification report
The chromatograms of the single session runs can be inspected by
selecting them on the left hand side. They are now permanently stored in
Installation folder \
Enterprise\_OEM\Performance Qualification\Generic PQ Procedures\ ...
Validation of Integration
This tool is a hardware independent test of the installed software package
that indicates how reliably the integration of the chromatograms will be
performed. To carry out this test, select any method setup window, to
gain access to the menu sequence.
METHOD – OPTIONS - VALIDATION OF INTEGRATION…