ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Setup and Control of Knauer HPLC Systems 79
To let the software search for your already connected and switchedon
device, click on the button to start the search for all connected
LAN devices of the currently configured type. The option “Use S/N to
identify the instrument” must be enabled. Select the desired device
from the shown list. The software will read-out the information as
serial number and will fill it automatically into the configuration
screen. To search for an instrument, the device must be connected,
switched on and must have a valid IP address.
As an option, you can enter the IP address of your device, if the
option “Use S/N to identify the instrument” is disabled. Please note
that in case the device receives the IP address from a DHCP server,
e.g. a router, the IP address may change if the device is switched off
and switched on.
Add Valve Info...
Click the button Add Valve Info to add the valve specific description or
comments for the selected valve.
Add. Info
Click the button Add. Info... to enter more detailed description of the
valve group. Enter additional information or comments to be printed out
when you print the instrument configuration.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.
Configuration – Manager 5000/5050, IF2
As with user defined detectors, the Manager 5000 / IF2 device must be
configured to control any user defined instrument (necessary for
programmed wave length control, pump control, switching valve control).
Please note, that the Manager 5050 must be configured as a Manager
5000.
Fig. 112 Configuration window for the Manager 5000/5050 / IF2
I/O Name
Enter a descriptive name for I/O of the manager. This name will appear
on the manager tab when the instrument setup or status windows are
displayed. Use a name which is unique within the instrument.
Interface
Select the used interface type Manager 5000 / IF2 (Manager 5000 if you
own a Manager 5050).
Device number
Select the device number. The available choices depend on the global
interface configuration as described on page 32.
Output
Select the channel of the interface in use.