ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

70 Setup and Control of Knauer HPLC Systems
Configuration – Autosampler 3800
Smartline Autosampler 3800 and K-3800 (Basic Marathon)
Fig. 98 Configuration window for the autosampler 3800
Name
Enter a descriptive name for the sampler. This name will appear on the
autosampler tab when the instrument setup or status windows are
displayed. Use a name which is unique within the instrument.
Device ID
Select the device identifier for the autosampler from the drop-down list.
This must match the settings of the autosampler being used. To check
the device identifier for the Smartline Autosampler 3800 or the K-3800
(Basic Marathon) press the PROG/END button on the autosampler
keyboard once in serial mode.
Serial Port
Select the number for the communication port on your PC where the
autosampler is connected.
Serial Number
Type in the serial number of the detector you are using.
Loop Volume
Enter the volume of the installed loop in µl.
Sample Tray
Select the type of the installed sample tray. The choices are 96 vials of
1.5 ml and 48 vials of 5.0 ml.
Tray cooling
Select this box if you have a built-in Peltier cooling option installed and
want to cool down your samples. The temperature setting will be done
within the instrument setup.
Partial loop fill
Check this box to select the partial loop fill injection mode (for the Basic
Marathon Plus only).
Add. Info
Click the button Add. Info... to enter a more detailed description of the
autosampler. Enter additional information or comments to be printed out
when you print the instrument configuration.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.
The autosampler 3800 must be set in to serial mode to be controlled
by software. Press the buttons and on the autosamplers
keypad, the display will show then “Serial Mode Press F0 to exit”.