ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

ChromGate® System Suitability Setup 187
2. Select a method for calculation of the performance values by clicking
on the Calculation Method down-arrow.
3. Choices include USP, EMG (Exponential Modified Gaussian), DAB,
JP, and AOH (Area/Height) method. The calculations used are given
in the equations section. For BP, EP, and ASTM methods, choose
DAB.
4. Click on the Calculate Performance Parameters box to enable the
suitability calculations for the method
Running a Suitability Test
Fig. 280
Once you have completed the System Suitability Setup and
Performance dialogs, create a Sequence or modify an existing
Sequence to include one or more system suitability runs according to the
needs and SOP’s of your laboratory. If you want the System Suitability
Report to print automatically at the end of the sequence, you must also
select the Print Sequence Reports option from the Sequence
Properties dialog box.
For example, following USP standards, five replicate standards are run at
the beginning of the sequence. These are designated as system
suitability standards in the sequence. At the end of the sequence,
suitability calculations are made, and EZChrom Elite Client/Server
generates a system suitability report.
Run Type is selected by clicking on the Run Type field, then selecting
the appropriate sample type from the choices provided.