ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Creating an Instrument Control Method 165
[>]
Pressing the [>]-button opens a window, that allows you for perform
several service operations.
Tray position
You can move the tray to several positions. The choices are Tray
Home, Needle exchange position and Tray Front.
Syringe position
The syringe can be moved to Home, End or Exchange position.
Valve position
The valve can be switch to Inject and Load position.
Instrument Status – Triathlon/Endurance Autosampler
Fig. 242 Autosampler Triathlon status tab
Monitor
AS Status
The status Ready will be displayed when the autosampler is waiting to
perform an injection. If an injection program is running, the actual
program step will be indicated. After a completed injection, the status is
described as Analysis timer running during the chromatographic run.
Current Vial
The actual position of the injection needle is shown.
Tray Temperature (°C)
If the tray cooling option has been installed and configured the actual tray
temperature will be shown.
Direct Control
The direct control features are not accessible during an injection.
Tray Temperature (°C)
If the tray cooling option has been installed and configured the tray
temperature can be set. The entered value will be transferred to the
sampler by clicking the Apply button. The On / Off button can be used
for enabling / disabling the cooling control. The labeling of the button
changes with the actual status.
Start Initial Wash
Press this button to force the autosampler to perform the needle wash.