ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

140 Creating an Instrument Control Method
Fig. 207 Instrument status tab, example: Smartline Pump 1000, LPG mode
Fig. 208 Instrument status tab, example: Kontron Pump 320
The tab consists of two main parts, the Monitor and the Direct Control
areas.
Monitor
Run Status
The status HOLD will be displayed when no program is running;
otherwise the Run Status displays a run time in minutes elapsed from the
start of the run. During a Pretreatment, the pump status is equilibrating.
Flow (ml/min)
The actual flow is indicated in this field.
Pressure Control (MPa)
The highlighted actual pressure is shown framed by the settings for the
allowed minimum and maximum pressures.
Components (%)
In case of gradient systems (HPG or LPG) the percentage of components
will be shown during the run. The components are also indicated by the
(multi) colored bar. In the case of isocratic systems the bar is completely
red colored, showing 100%.
Events (Digital Outputs)
The current state for each Event (Digital Output) will be displayed in this
control. The On state is represented by a red active Light Emission Diode
LED symbol ( ), the Off state, including waiting for pulse, is represented
by an inactive grey LED symbol ( ).