ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

82 Setup and Control of Knauer HPLC Systems
Fig. 117 Configuration window for the Bronkhorst flowmeter
Name
Enter a descriptive name for the flowmeter. This name will appear on the
flowmeter tab when the instrument setup or status windows are
displayed. Use a name which is unique within the instrument.
Serial Number
Type in the serial number of the flowmeter you are using.
Serial Port
Select the number for the communication port on your PC to which the
flowmeter is connected.
Capacity Mode
Select the desired capacity mode from the drop-down menu. The choices
are “Volume Flow” and “Mass Flow”. The Y-Axis unit will change
dependently from the selected capacity mode.
Capacity Limit
Set the capacity limit which depends from the flowmeter model and the
selected capacity mode / y-axis units.
Y-Axis Units
The available y-axis units depend from the selected capacity mode.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.