ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

ChromGate® PDA Option 197
Fig. 290
3D Properties
This dialog allows you to set the properties of the 3D plot.
Style
Select Color or Grayscale for the plot. Checking the Wire Mesh box will
cause the data to be rendered as a wire frame plot, rather than as a solid
fill plot.
Colors
Range
Select how you want the coloration on the plot to appear. When Light &
Dark Range is selected, alternating light and dark bands are used. When
Full Spectrum is selected, then a continuous color spectrum is used.
Background
Select the color for the background of the plot.
Axes
Select the color for the plot axes.
Display
This specifies the relative quality of the displayed contour plot. Lower
Display Detail will result in faster drawing of the plot.
Print
This specifies the relative quality of the printed contour plot. Lower Print
Quality will result in faster printing.
Viewing
Use these fields to view current rotation settings, or to set them manually.
Light source
Selecting this option causes the plot to be shaded as if an external light
source were shining upon it.
Rotation
This reports the current level of rotation (front to back) in the aspect
position of the plot. When a new value is entered, the plot is redrawn to
reflect the new value upon exiting the dialog.