ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

198 ChromGate® PDA Option
Fig. 291
Elevation
This reports the current level of tilt (forward or backward) in the aspect
position of the plot. When a new value is entered, the plot is redrawn to
reflect the new value upon exiting the dialog.
Roll
This reports the current level of roll (side to side) in the aspect position of
the plot. When a new value is entered, the plot is redrawn to reflect the
new value upon exiting the dialog.
Zoom
This reports the current level of magnification in the plot. When a new
value is entered, the plot is redrawn to reflect the new value upon exiting
the dialog.
Performance - Use Zoom/Rotate Bounding Box
When this box is checked, the plot will be temporarily replaced by a box
during zoom and rotation operation. When the operation is completed,
the plot will be redrawn. Checking this box will increase performance on
computers with slower graphic subsystems.
3D Properties Axis
This dialog lets you set up axis limits for your 3D plot.
Limits
Enter the limits for the 3D plot.
Time
Click Auto scale if you want to have the software automatically scale the
time axis to the maximum values. To enter a manual range, de-select the
auto scale box, and add your own limits, or click the Get Limits button to
enter the limits displayed on the current 3D graph.
Wavelength
Click Auto scale if you want to have the software automatically scale the
wavelength axis to the maximum values. To enter a manual range, deselect
the auto scale box, and add your own limits, or click the Get
Limits button to enter the limits displayed on the current 3D graph.