ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

100 Creating an Instrument Control Method
Fig. 146 Detector S 2550 time based scan
Instrument Setup – Diode Array Detectors
(S 2600, DAD 2850, DAD 2800, K-2700 and Kontron DAD 540/545)
The S 2600, S 2850, S 2800, K-2700, and K-2800 detectors are fullyfunctional
DAD (diode array detector) or PDA (photo diode array)
detectors with the capability to simultaneously collect data over the entire
UV and visible spectra.
These detectors support the general detector settings described on page
91.
Fig. 147 Detector S 2600 setup window with PDA option
Options
An. output (no access with Kontron DAD 540)
You can activate the option to select the scaling of the analogue output
signal. This option is not compatible with a set sampling rate of 10 Hz.
The following error message will be displayed when the window will be
closed:
Fig. 148 Error message
Scale
The selected value represents the full scale. Values are selectable from
0.001 AU up to 10 AU. For the Kontron DAD 540 it is fixed on 10 AU
Autozero at WL change
Check this option if you wish the signal to be zeroed at the moment the
wavelength is changed (to define the current signal as the baseline). At
the run start always an Autozero is performed.