ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Creating an Instrument Control Method 125
Fig. 178 Autosampler Triathlon editing user defined programs, new step
Select the Action from the drop-down list. The appearance of the dialog
will be changed, depending on the selected action.
Fig. 179 Autosampler Triathlon UDP action choices
Aspirate
Aspirates a programmed volume from a sample vial, a destination
vial, a wash vial, or one of the reagent vials into the buffer tubing.
Speed and height of the syringe can be entered. The maximum
volume that can be aspirated is the total volume of the syringe. If more
than one consecutive aspirating action (from different sources) is
programmed, the total volume of the consecutive aspirating actions
cannot exceed the volume of the syringe.
Dispense
Dispenses a programmed volume from the buffer tubing into the
sample vial, a destination vial, the waste, a wash vial, or one of the
reagent vials. Speed and height of the syringe can be entered.
Syringe Valve
This action controls the inter-connections of the syringe to one of its
three ports:
NEEDLE: connection to the sample needle.
WASH: connection to the wash solvent bottle.
WASTE: connection to the syringe waste tubing.
Syringe
This action controls the movement of the syringe
LOAD: loads the syringe with the programmed volume.
UNLOAD: unloads the syringe with the programmed volume.
HOME: initializes the syringe to its HOME position. The volume
previously aspirated will be dispensed to the last
programmed position.
Needle Wash
With this action a needle wash can be performed. The content of the
buffer tubing will not be rinsed to waste before the washing procedure