ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

SEC Option 265
Fig. 374
Fig. 375
A dialog box will appear where you can select both SEC-specific and/or
normal chromatogram annotations. To view the SEC-specific parameters
for annotation, select SEC from the drop down list (peaks/SEC). A list of
SEC calculated values will appear that you can choose for annotation on
your chromatogram. To select a parameter, double-click on it to move it
to the right-hand box.
Note that the standard Baseline is not used in SEC, so it should not be
selected. To annotate the SEC Baseline, select the checkbox for this
option. Once the annotations are selected, click OK and they will appear
on your chromatogram, as shown below.
Note: If you have not entered an SEC Baseline or Result Range into
your SEC method yet, it will not appear on the chromatogram.